Metal-Air Battery Market Analysis and Global Forecast 2023 – 2033

Increasing adoption of renewable resources will rise the demand for metal-air battery market globally

Metal-Air Battery Market Overview

The global Metal-Air Battery market size is projected to reach approximately USD 1.46  Billion by 2030, at a CAGR of 14.42% from 2022 to 2030. A metal-air battery is a type of electrochemical energy storage device that uses a reactive metal anode and an air (oxygen) cathode. The anode is typically made of a metal such as zinc, aluminum, or lithium, while the cathode is exposed to the air, which provides a source of oxygen for the electrochemical reaction that generates electrical energy. Metal-air batteries have the potential to offer high energy density, low cost, and good safety, making them an attractive alternative to traditional lithium-ion batteries.

COVID-19 Impact Analysis

COVID-19 had positively impacted the Metal-Air Battery market. The COVID-19 pandemic has highlighted the importance of renewable energy sources as a way to reduce greenhouse gas emissions and combat climate change. Metal-Air Batteries, which are known for their high energy density and potential for use in electric vehicles and grid storage, may see increased demand as a result of this focus on renewable energy. Also, Governments around the world are looking to support the development of clean energy technologies as part of their COVID-19 economic recovery plans. This could lead to increased funding and support for Metal-Air Battery research and development.

Metal-Air Battery Market Dynamics

The Metal-Air Battery market is driven by the increasing adoption of renewable resources, technological advancements such as 3D printing technology and laser processing, and also emerging new application areas for metal-air batteries will create opportunities for market growth.
Drivers:
Ø  Increasing adoption of renewable resources
The increasing adoption of renewable resources, such as solar and wind power, is driving the demand for energy storage solutions that can store excess energy generated during periods of peak production and release it when needed. Metal-air batteries are emerging as a promising solution to meet this demand. Metal-air batteries are a type of battery that uses metal as an anode and air (usually oxygen) as a cathode. When the battery discharges, the metal reacts with the air to produce electricity. Metal-air batteries have several advantages over conventional batteries, including higher energy density, longer cycle life, and lower cost.
Metal-air batteries can store excess energy from renewable sources during periods of low demand and release it when demand is high. This can help reduce the need for fossil fuel-based power plants to meet peak demand. In addition to their use in renewable energy storage, metal-air batteries are also being developed for other applications, such as electric vehicles and portable electronics. The high energy density and long cycle life of metal-air batteries make them well-suited for these applications.
Restraint:

• Unavailability of proper standards

The lack of proper standards and regulations is one of the factors that can restrain the growth of the metal-air battery market. The absence of clear guidelines for the design, manufacturing, and testing of metal-air batteries can create uncertainty and confusion in the market, leading to delays in product development and commercialization. Without standardized testing methods and performance criteria, it can be difficult for manufacturers to compare and evaluate the performance of different types of metal-air batteries. This can make it difficult for potential customers to make informed decisions about which products to use, which can slow the adoption of the technology. In addition, the lack of proper standards can create safety concerns. Metal-air batteries can be dangerous if not designed, manufactured, and operated properly. The absence of clear safety guidelines can make it difficult to ensure the safe and reliable operation of these batteries.

In conclusion, the unavailability of proper standards and regulations can be a significant obstacle to the growth of the metal-air battery market. The development of clear guidelines for the design, manufacturing, testing, and safety of these batteries is critical to ensure their safe and reliable operation and to accelerate their adoption in various applications.
Opportunity:

• Emerging new application areas for metal-air batteries

The metal-air battery market offers several opportunities for emerging application areas where metal-air batteries can provide unique advantages over existing battery technologies. Metal-air batteries have a high energy density, which means they can store more energy per unit of weight or volume than many other battery types. They also have the potential for longer cycle life and lower cost per kilowatt-hour of energy storage.

The high energy density of metal-air batteries makes them an attractive option for electric aviation applications. Metal-air batteries could potentially offer longer flight times and greater range for electric aircraft. Metal-air batteries are used for large-scale grid energy storage applications. They could provide a cost-effective and efficient way to store renewable energy for use during peak demand periods. Metal-air batteries are also used to power UAVs, offering longer flight times and greater range than other battery types.

Overall, the emerging application areas for metal-air batteries are numerous, and they offer significant opportunities for growth in the metal-air battery market.

Challenges:

• Rising adoption of lithium-ion batteries

The rising adoption of lithium-ion batteries in various applications, including electric vehicles and renewable energy storage, is a potential restraint on the growth of the metal-air battery market. Lithium-ion batteries are a mature technology with a well-established supply chain and manufacturing infrastructure, which can make it difficult for new battery technologies such as metal-air batteries to compete in terms of cost and performance. Lithium-ion batteries have become the dominant technology in the electric vehicle market due to their high energy density, long cycle life, and relatively low cost. In the renewable energy storage market, lithium-ion batteries are also widely used due to their ability to provide fast and reliable energy storage.

The mature supply chain for lithium-ion batteries has also led to economies of scale in manufacturing, which can make it difficult for new battery technologies such as metal-air batteries to compete on cost. Additionally, lithium-ion batteries are well-established in terms of standards and regulations, which can make it easier for manufacturers to meet compliance requirements.

Metal-Air Battery Market Segment Overview

By Redox flow battery type

Based on Redox flow battery type, the global Metal-Air Battery market has been segmented based on Vanadium Redox Flow Battery, and Hybrid Redox Flow Battery. The Vanadium Redox Flow Battery segment is the fastest growing in the global Metal-Air Battery market.

By Metal

Based on Metal, the global Metal-Air Battery market has been segmented based on Zinc, Lithium, Aluminum, Iron, and Others. The Lithium segment is expected to be the fastest-growing in the global Metal-Air Battery market.

By Voltage

Based on the Voltage, the global Metal-Air Battery market has been segmented based on Low (<12V), Medium (12-36V), and High (>36V). The High (>36V) segment is expected to be the largest in the global Metal-Air Battery market.

By Type

Based on the Type, the global Metal-Air Battery market has been segmented based on Primary, Secondary. The Secondary segment is expected to be the largest in the global Metal-Air Battery market.

By Application

Based on the Application, the global Metal-Air Battery market has been segmented based on Electric Vehicles, Military Electronics, Electronic Devices, Stationary Power, and Others. The Electric Vehicles segment is expected to be the largest in the global Metal-Air Battery market.

Global Metal-Air Battery Market Share, by Segmentation

Metal-Air Battery Market Regional Analysis

By region, the global Metal-Air Battery market has been divided into North America, Europe, Asia-Pacific, and the Rest of the World. The North American region holds the largest market for the  Metal-Air Battery business.

Asia-Pacific Market

The Asia Pacific region is projected to grow with a high CAGR in the Metal-Air Battery market. Due to increasing demand for electric vehicles, portable electronic devices, and renewable energy storage solutions, which are all potential applications for Metal-Air Batteries. In addition, the region has a large population and a growing middle class, which could increase the demand for energy storage and transportation solutions. Several countries in the region, such as China, Japan, and South Korea, are investing heavily in the development of clean energy technologies, including Metal-Air Batteries, and have established government initiatives and funding to support research and development in this area.

North America Market

North America is the largest region in the Metal-Air Battery market. The Metal-Air Battery market is still in the early stages of development and its size and growth are difficult to estimate due to the lack of widespread commercialization of Metal-Air Batteries. While North America is certainly an important region for Metal-Air Battery research and development, it’s important to note that other regions around the world are also investing in this technology, such as Europe and Asia. In addition, the Metal-Air Battery market is expected to be driven by factors such as the increasing demand for electric vehicles, renewable energy storage, and portable electronic devices, which are global trends that could lead to growth in the Metal-Air Battery market across all regions.

Competitive Landscape

The market comprises tier-1, tier-2, and local players. With their wide product portfolios, tier-1 and tier-2 players have a global reach. Because of their strategic innovations and broad regional presence, companies such as GP Batteries International Limited, AROTECH Corporation, Energizer Holdings, and Duracell, lead the global Metal-Air Battery business. To increase their market position and attract a wide consumer base, the businesses are employing various strategies, such as growth, product releases, and alliances.

Prominent Players:

• GP Batteries International Limited
• AROTECH Corporation
• Energizer Holdings
• Duracell
• Renata Battery
• Phinergy
• Log 9 Voltages
• PolyPlus Battery
• Zinc8 Energy Solutions
• Panasonic Batteries

Recent Development

• In January 2023: The epsilor subsidiary of Arotech Corporation announced the launch of a tiny lithium-ion rechargeable battery that can be used to power the recently launched Tel Aviv University (TAU) nanosatellite.
• February 2022: Duracell has established a collaboration with Williams Racing. This collaboration will span many high-profile marketing activities, including a significant TV commercial, esports, and on-the-ground engagement at various Grand Prix, beginning with the Miami Grand Prix in May. The Duracell logo will be prominently displayed on the Williams vehicle, team gear, and race suits of Alex Albon and Nicholas Latifi.
• May 2022: Epsilor subsidiary of Arotech Corporation announced the launch of a new Li-Ion NATO 6T Battery.

Scope of the Report

Global Metal-Air Battery Market, by Redox flow battery type

• Vanadium Redox Flow Battery
• Hybrid Redox Flow Battery

Global Metal-Air Battery Market, by Metal

• Zinc
• Lithium
• Aluminum
• Iron
• Others

Global Metal-Air Battery Market, by Voltage

• Low (<12V)
• Medium (12-36V)
• High (>36V)

Global Metal-Air Battery Market, by Type

• Primary
• Secondary

Global Metal-Air Battery Market, by Application

• Electric Vehicles
• Military Electronics
• Electronic Devices
• Stationary Power
• Others

Global Metal-Air Battery Market, by Region

• North America
  • US
  • Canada
  • Mexico
• Europe
  • UK
  • Germany
  • France
  • Italy
  • Rest of Europe
• Asia Pacific
  • China
  • Japan
  • South Korea
  • India
  • Rest of Asia Pacific
• Rest of the World

 

Parameters	Indicators
Market Size	2032: $ 1.46 Billion
CAGR	14.42% CAGR (2021-2030)
Base year	2022
Forecast Period	2023-2033
Historical Data	2021
Report Coverage	Revenue Forecast, Competitive Landscape, Growth Factors, and Trends
Key Segmentations	Redox flow battery type, Metal, Voltage, Type, Application
Geographies Covered	North America, Europe, Asia-Pacific, Latin America, Middle East, Africa
Key Vendors	GP Batteries International Limited, AROTECH Corporation, Energizer Holdings, Duracell, Renata Battery, Phinergy, Log 9 Voltages, PolyPlus Battery, Zinc8 Energy Solutions, Panasonic Batteries
Key Market Opportunities	Emerging new application areas for metal-air batteries
Key Market Drivers	Increasing Adoption of Renewable Resources Technological Advancements Such as 3D Printing Technology and Laser Processing

 

REPORT CONTENT BRIEF:

• High-level analysis of the current and future Metal-Air Battery market trends and opportunities
• Detailed analysis of current market drivers, restraining factors, and opportunities in the future
• Metal-Air Battery market historical market size for the year 2021, and forecast from 2022 to 2030
• Metal-Air Battery market share analysis at each product level
• Competitor analysis with a detailed insight into its product segment, financial strength, and strategies adopted.
• Identifies key strategies adopted including product launches and developments, mergers and acquisitions, joint ventures, collaborations, and partnerships as well as funding taken and investment done, among others.
• To identify and understand the various factors involved in the global Metal-Air Battery market affected by the pandemic
• To provide a detailed insight into the major companies operating in the market. The profiling will include the financial health of the company’s past 2-3 years with segmental and regional revenue breakup, product offering, recent developments, SWOT analysis, and key strategies.